Incoming: hot rolled band after acid treatment.

  Material:  Q195,Q215,08A1 etc

  Thickness: 1.2-4

Width: 950-1300

Coil diameters(internal/external): φ610/φ1900-φ900

Heaviest coil weight: 25t

Finished product

Thickness: 0.27-1

Width: 950-1300

Coil diameters(internal/external): φ510/φ1900-φ900

Heaviest coil weight: 25t

Major technical parameters:

Max. rolling force: 15000KN

Max. rolling torque: 110KN.M

Rolling speed: 0-468-1000m/min

Band penetrating speed: 30m/min

Uncoiling tension: 80-8KN

Max. uncoiling speed: 400m/min

Coiling tension: 170-17KNV<640m/min

      100-10KN (V≥640 m/min)

Max. coiling speed: 1050 m/min

Specification of working roll: φ400-φ370×1450

Specification of intermediate roll: φ450-φ415×1450

Specification of support roll: φ1250-φ1190×1350

Rolling diameter of uncoiler: φ560-φ620

Rolling diameter of coiler: φ510-φ495

Technical Level of the Set

Total digital DC timing, supply of electricity with thyristor, PLC control

of the set. Full hydraulic pressure, AGC automatic control.The electronic

control system of the rolling mill is equipped with security protection system,such as overload protection, band breakage protection, emergency shutdown, etc. and both rolling mill and coiler have the functions of shutting down accurately, recording number of coils, automatically decelerating and shutting down in band tail. Automatic alignment of CPC of uncoiler. Adjustment of positive and negative bending roll of working roll and of positive bending roll of intermediate roll; the set of lateral movement of intermediate roll matches with the segmental cooling of rolls, so as to make better profile shape available. Rapid change of rolls of working roll and intermediate roll. Automatic control and digital displays of rolling speed and tension. Once the elevation of rolling line is pressed down, the screws are being adjusted at high speed.Oil-mist lubrication in bearing of rolling mill.

The equipment has the system for presetting of process parameters, detections and displays of technological process parameters and key equipment parameters, and automatically diagnosing and warning failures. The sets production processing chain and failure warning adopt Programable Logical Controller (PLC) to achieve automation.